The sheet metal bending division, consisting of several bending presses for both air and coining bending, was one of the first to be established and has acquired sound technical knowledge over the years.
Some of our bending presses have completely independent 6-axis back gauges. Besides, they can be equipped with bending sensors that allow for correcting the sheet camber with a ±0,3 tolerance on the pre-set nominal bending angle.
Similarly to our other divisions, a wide range of products with gauges from 1 to 16 mm can be manufactured thanks to our considerable machinery diversity.
| Sheet metal bending | Power | Bend length (mm) | Year of construction |
| CNC TRUMPF TrumaBend V170 | 170 TON | 4000 | 1998 |
| CNC TRUMPF TruBend 7036 | 36 TON | 1000 | 2011 |
| CNC TRUMPF TruBend 5230 | 230 TON | 3000 | 2011 |
| CNC SCHIAVI RG-25-12A | 25 TON | 1250 | 1988 |
| CNC AMADA/SCHIAVI RG-102 | 100 TON | 2000 | 1998 |
| CNC SCHIAVI RG-153 | 150 TON | 3000 | 1981 |
| CNC AMADA/SCHIAVI STP-C203 | 200 TON | 3000 | 1989 |
| CNC AMADA/SCHIAVI HFB170-30 | 170 TON | 3000 | 2001 |
| CNC AMADA/SCHIAVI STP-C404 | 400 | 4000 | 2001 |